How do I configure my own, unlocked LinkSys SPA2102 with ViaTalk? |
Article ID: 198 |
Created On: 21 Aug 2012 |
These instructions assume that you are utilizing a computer that is plugged into the Ethernet port of a non-branded or unlocked LinkSys SPA2102. 1) Open a web browser (Internet Explorer, Safari, etc.) and copy/paste the following link into the address bar: http://192.168.0.1/admin/voice/advanced/ 2) You will be prompted to enter your administrative username and password. username: admin password: 3) Click the 'Line 1' tab at the top of the page. Once the page loads, you will see the information for your adapter's configuration. (You may open a separate browser window and visit your ViaTalk Control Panel to view your credentials found under the 'Softphone Configuration' icon.) Proxy: Display Name: User ID: Password: DTMF Tx Method: Auto 4) Click the 'Submit All Changes' link at the bottom of the page. Once this is complete, in approximately one minute you should see the Phone 1 light lit on the device. Plug a standard, touch-tone phone into the Phone 1 port to confirm dial tone, and you may then begin placing calls! |